When a marble floor becomes dull and scratched, it obviously loses its shine and lustre. These scratches or dullness is predominantly due to constant foot traffic that the floor is subjected to. At this point in time, the marble floor needs to be refinished to restore its original shine. The process of bringing back the gloss and shine is called ‘crystallization’. Marble floor crystallization is normally a 4-step procedure, which are as below : –
1. The first step of marble floor restoration is grinding and honing. This is nothing but a process of removing the lippage (the uneven portions existing on the floor). Even newly installed marble floors can have higher or lower tiles due to the natural gradient of the floor. This step removes all edges, roughness, and makes the floor even and smooth. This step can also remove the deepest of scratches and stains.
2. The process of honing is usually done when the existing floor has a high amount of scratches, possible stains and is extremely dull. This process is done with the help of a single disc machine and diamond pads that cut the top surface of the soft marble stone in a uniform pattern. The diamond pads are to be used from a coarser to a finer pattern to ensure consistency in the honing process.
3. Crystallization process, the first important thing to do is to clean the honed floor with the help of a microfibre mop so as to pick up all the finer particles of stone, dust and sand. Take the crystallizing compound and apply to the floors with the help of a single disc machine. Work for three – four minutes/sqm. of the floor and massage the crystallizing compound into the floor.
4. Buffing , Rinse the floor with plenty of water and pick up the salt solution with a Wet & Dry vacuum cleaner. Crystallization creates a microfilm on the surface of marble which is more solid and durable and helps to preserve the colour and brightness of marble.
Single disc machine (that weighs a minimum of 50 Kgs and above and rotation speed of 165 rpm)
a. “Crystallization” where it required on Marble Flooring
b. Cleaning of Rough stone
c. Removal of lippage
Steam cleaning is a deep cleaning process that combines the use of chemicals and a high-pressure blast of hot water and steam to remove dirt and grime from different materials and surfaces.
It’s very simple really. Dirt and grime have adhesive qualities that enable them to stick onto all types of surfaces. The heat of the steam melts the adhesive and the dampness of the steam dilutes the adhesive. A wipe with a cloth quickly clears the dirt or grime away.
As there is a huge amount of glass partition and walls in entire building it required proper cleaning to complete Housekeeping Activity.
Carpet, curtain & Couches come in a variety of materials, from cotton upholstery to leather. Many of these materials are difficult to clean with normal household cleansers, which often leave spots or marks behind. Our Professional services will you provide complete solution for upholstery.